Lawn Sprinkler Pump Repair
Water filtration is an important part of any irrigation system. Even sprinklers designed to spread solids will need a filter to keep out particles that are too large for the system.
A properly installed filter will help lower your maintenance costs and extend the life of your sprinkler system, especially the heads and valves. Drip systems also need a filter as foreign objects can clog the emitters. Did you know that just a few grains of sand can cause damage to lawn and make it look brown? It can also cause undue wear on components in your sprinkler system.
While sand is the biggest culprit that can clog your sprinkler system, organic materials like algae can also build up and caused clogs and breakdowns.
Now that I have convinced you to install a filter, lets look at a few different options.
The least expensive and most common style of filter is the screen. A simple screen filter installed before your water supply can catch a lot of sand. They are not as effective on algae or mold. These things tend to build up on the screen and clog it. They can also slip through a screen filter easier than sand.
You will need to clean the screen occasionally and this is done by flushing. A simple flushing outlet can be installed to wash all of the debris out of the filter. You can also backwash. This involves spraying water from the "back" of the filter to remove the debris. A second stream of water is sometimes used to sort of "vacuum" what the backwash stream removes.
Cartridge filters are also quite popular. They do not need to be cleaned, you simple replace them. A cartridge filter has a paper filter similar to a screen that can effectively remove algae and mold from the water supply.
Tomorrows's post will cover media, disk, and centrifugal filters. I hope to see you back then. Please leave a comment if would like.
Fort Lauderdale Lawn Sprinkler Service
2728 Davie Blvd. Suite 148
Fort Lauderdale, FL 33312